+64 9 921 2221

Aluminium & Ductile Iron Bar Stock – Free Cutting On All Orders!

Most major suppliers in New Zealand don’t offer custom cut lengths of Aluminium and Ductile Iron, therefore a full length is purchased and often the remaining off-cut is wasted.

HytechSawImageAs a leader in Engineering, we understand that a full length is not always required and therefore we have decided to make this option available for our clients. There is no need to purchase full lengths of Aluminium and Ductile Iron as we will cut the sizes you need and we don’t charge a cutting fee. You can customise the size to your specific requirements.

We can supply in any quantity as well on request.

If the size you require is not listed in the size table/section on this page, feel free to contact our friendly and experienced staff who will be able to source it for you.

Aluminium Grade 6061-T6Hytech-Photo-Aluminium-LR

General 6061 characteristics and uses: Excellent joining

Characteristics include good acceptance of applied coatings, combines relatively high strength, good workability and high resistance to corrosion. This is a very common material for general machining.

Applications: Aircraft fittings, camera lens mounts, couplings, marines fittings and hardware, electrical fittings and connectors, decorative or misc. hardware, hinge pins, magneto parts, brake pistons, hydraulic pistons, appliance fittings, valves and valve parts, bike frames.

 Aluminium Grade 6082-T6

Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.

6082 Typical Applications:
Highly stressed applications, Trusses, Bridges, Cranes, Transport applications.

Flat Bar 6061 Square Bar 6061
63.5mm x 31.75mm 37.1mm
76.2mm x 31.8mm 63.5mm
75mm x 40mm 127mm
101.6mm x 50.8mm 139.7mm
Flat Bar 6082 Square Bar 6082
50.8mm x 25.4mm 50.8mm
76.2mm x 38.1mm 76.2mm
76.2mm x 50.8mm 101.6mm
101.6mm x 40mm 127mm
101.6mm x 50.8mm 152.4mm
101.6mm x 76.2mm
127mm x 76.2mm
127mm x 101.6mm
152.4mm x 76.1mm

Hytech-Photo-Ductile-LRDuctile Iron

Ductile Iron UB 400 offers superior machinability and surface finish combined with good fatigue strength’s, electrical conductivity and magnetic permeability.

Noise and vibration damping are good in this grade. Conforms with EN-16482:2014-ENGJS-400-15C.

 Ductile Iron Sizes
2.03″ x 2.03″ 4.03″ x 4.03″ 6.03″ x 8.03″
2.03″ x 2.53″ 4.03″ x 5.03″ 6.03″ x 10.03″
2.03″ x 3.03″ 4.03″ x 6.03″ 7.03″ x 7.03″
2.53″ x 2.53″ 4.03″ x 7.03″ 8.03″ x 8.03″
3.03″ x 3.03″ 4.53″ x 7.53″ 8.03″ x 10.03″
3.03″ x 4.03″ 5.03″ x 5.03″ 10.03″ x 10.03″
3.03″ x 5.03″ 5.03″ x 7.03″ 10.03″ x 12.03″
3.03″ x 6.03″ 5.03″ x 8.03″ 11.03″ x 11.03″
3.03″ x 8.03″ 6.03″ x 6.03″ 12.03″ x 12.03″
4.03″ x 2.03″ 6.03″ x 7.03″

Freight & Collection to be arranged depending on order size and specifications.

Free Cutting on all orders.

Don’t hesitate to give us a call or complete the Information Request form and one of our experiences team members will get back to you.

Information Request

Your Name (required)

Your Email (required)


Your Message

Sign Up For Hydrafile News

Subscribe to our mailing list
* indicates required